RhinoPower Ltd

Members Login
Username 
 
Password 
    Remember Me  
Post Info TOPIC: Sierra 1.3 ECM/Wiring into Minuti Ute


Guru

Status: Offline
Posts: 1351
Date:
Sierra 1.3 ECM/Wiring into Minuti Ute
Permalink  
 


That is a G13BB Jimny ECU, so it will work if you have the correct cam sensor. The pinout is different to the Baleno but you can swap the wires around, the Jimny manuals are here: http://rhinoman.org/manuals/Jimny/jimny.zip



-- Edited by TechSupport on Tuesday 16th of June 2020 07:00:19 PM

__________________

1984 Suzuki SJ413K pick up, 1.6 16V Baleno engine
2000 Suzuki Vitara 1.6 8V, many mods
2004 Suzuki Ignis 1.5VVT 4Grip
2006 Suzuki Jimny 1.3VVT JLX+
and many more.



Newbie

Status: Offline
Posts: 1
Date:
Permalink  
 

 

Hello I am new here.

I am helping a mate fit a G13BB (Sierra) into a little Minuti ute. I was wondering if you could help me with some questions re the wiring of this.

Firstly, I am unsure what model the ECU came from; it was supplied with the engine.

Secondly, the Loom/Plugs we have are from a G16B Baleno; unsure of the year. This was the only Loom we could find with the correct ECU Plugs.

I have attached some photos of the ECU, wiring diagram and a spreadsheet, which I have derived from a post on here detailing putting a 1.3 Sierra into a 16B.

I realize I will have to cross reference the wire colours and butcher the loom to suit the ECU.

 

Are the Pin outs in the Drawing applicable to my ECU?

Is the ECU from a G13B and if so is it compatible with with what we are trying to do?

Is there an easier way to go about this?

Any help will be greatly appreciated.

Thanks Tony



Attachments
__________________
Page 1 of 1  sorted by
 
Quick Reply

Please log in to post quick replies.



Create your own FREE Forum
Report Abuse
Powered by ActiveBoard