RhinoPower Ltd

Members Login
Username 
 
Password 
    Remember Me  
Post Info TOPIC: Suzuki Jimny G13BB HO2S Sensor Removal


Member

Status: Offline
Posts: 9
Date:
RE: Suzuki Jimny G13BB HO2S Sensor Removal
Permalink  
 


Hi DLM127,

Thank you very much for your post, I finally got the rotten little connector apart and the HO2S sensor off the vehicle thanks to your advice.

I was actually able to resurrect the sensor and all is good DownUnder again (even if the "H" bit is broken).

I have written up my saga incase others may find it useful.

Again a very big thanks to Rhinoman and the others who responded to my various posts.

Cheers...Bob



__________________


Newbie

Status: Offline
Posts: 3
Date:
Permalink  
 

Hi Bob

 

They can become a little stuck over time, but lift the tab and pull the center of the connector (not the wires)G13BB_HO2S_Sensor_1.jpg

 



Attachments
__________________


Member

Status: Offline
Posts: 9
Date:
Permalink  
 

Hi All,

 

Does anyone know how to disconnect the electrical coupler on the G13BB HO2S Sensor?

It is stuck behind the engine between the head and the firewall. It is extremely difficult to get at. The sensor has a green coupler body, the main harness loom has a grey body. There is a lock tab that seems to need to be pressed in with a screwdriver or similar, but I have tried pushing and lifting to no avail. See attached photo (nearly impossible to get this shot too!)

Cheers...Bob



Attachments
__________________
Page 1 of 1  sorted by
 
Quick Reply

Please log in to post quick replies.



Create your own FREE Forum
Report Abuse
Powered by ActiveBoard