RhinoPower Ltd

Members Login
    Remember Me  
Post Info TOPIC: Water damaged 99 Tracker 1.6l ECU swap with 2.0L ECU.


Status: Offline
Posts: 1228
RE: Water damaged 99 Tracker 1.6l ECU swap with 2.0L ECU.

It can be reflashed with the correct equipment but it would be easier to swap the processors over. To reflash you need a code that is stored inside the processor and the only way to get that is to remove the processor and read it with a special adapter.


1984 Suzuki SJ413K pick up, 1.6 16V Baleno engine
2000 Suzuki Vitara 1.6 8V, many mods
2004 Suzuki Ignis 1.5VVT 4Grip
2006 Suzuki Jimny 1.3VVT JLX+
and many more.


Status: Offline
Posts: 1

Hey guys!


Need a bit of advice here... First off, can my ecu be flashed? (99 tracker 4x4 5spd 1.6L Canada)


My ECU got water damaged... Long story... Water crossing failed...


here is my ecu code:



If it's not flashable... I managed to get an ECU from a 2.0L.. It's IDENTICAL same board and chips but a different flash. It will run my truck but VERY BADLY.  Can someone one point me to the chip that contains the flash data so that I can swap it from the deffective board to the new good one?


here are the pics:


Damaged ECU (1.6l):

Damaged ECU


New ECU (2.0L):

NEW ECU (from a 2.0l Tracker / Vitara)


I suspect it's thjis chip:



I would like to desolder the chip from the bad ECU board and re-solder it to the GOOD ecu board.


Or if possible, reflash the new ECU with a stock flash from a 99+ 1.6l Tracker / Vitara.


Thanks in advance for all your help!

Page 1 of 1  sorted by
Quick Reply

Please log in to post quick replies.

Create your own FREE Forum
Report Abuse
Powered by ActiveBoard