RhinoPower Ltd

Members Login
Username 
 
Password 
    Remember Me  
Post Info TOPIC: 1998 Suzuki Jimny G13BB


Guru

Status: Offline
Posts: 1351
Date:
RE: 1998 Suzuki Jimny G13BB
Permalink  
 


Fieldsports wrote:

I have tried loads since our conversation , used a pro set up from a garage and it read it. it was the X341 model ( £2000 )


X431? Looks like a proper pro piece of kit, expensive, but it looks like you get a lot for your money.

 http://www.x431.com/pdtdesc/pdtDescAction.do



__________________

1984 Suzuki SJ413K pick up, 1.6 16V Baleno engine
2000 Suzuki Vitara 1.6 8V, many mods
2004 Suzuki Ignis 1.5VVT 4Grip
2006 Suzuki Jimny 1.3VVT JLX+
and many more.



Newbie

Status: Offline
Posts: 3
Date:
Permalink  
 

Hi mate.
I appreciate your call the other day.
If you want to send me a request for the cable it would be good ( Also a link to software required as you said the software I have will not work )
I have tried loads since our conversation , used a pro set up from a garage and it read it.
it was the X341 model ( £2000 )
Anyways if you have the lead that will Extend through the sitting room window with my USB extensions and work with some software to my PC ( I will take your advice on this )...
Please text or ring 07858560666 or pay pal request Fieldsports@msn.com
Thanks Steve Henderson
North East ( Newcastle )

PS: Thats if it will work mate.



__________________


Newbie

Status: Offline
Posts: 3
Date:
Permalink  
 

Hi James.
I am Just outside Newcastle, Tyne and wear.
NE39 Postcode
Thanks

__________________


Guru

Status: Offline
Posts: 1351
Date:
Permalink  
 

Hi
I have replied on BigJimny.com as well.

I can sell you a cable that will work with your ECU. Your existing software will not be suitable because it is designed to work with an ELM chip which uses a superset of OBD2. Whereabouts are you located?
Cheers
James

__________________

1984 Suzuki SJ413K pick up, 1.6 16V Baleno engine
2000 Suzuki Vitara 1.6 8V, many mods
2004 Suzuki Ignis 1.5VVT 4Grip
2006 Suzuki Jimny 1.3VVT JLX+
and many more.



Newbie

Status: Offline
Posts: 3
Date:
Permalink  
 

Can I ask for some help please.
I have tried OBD2 hand held readers that do not work so now I think I will move to a laptop to read the ECU and begin to play.
I want a cable that will connect USB2 to a PC and fit a Jimny 1998 plug.
There is a few on Ebay but most says that they work on Petrol cars 2001 and above.
Can anyone tell me what cable I need ?
Keep it simple if poss so I can follow instructions easy.
( I went to a yard and removed a plug from a V reg vehicle, there was only 3 wires in the plug, black ground and one either side )
PS: I have software just need a cable.

Any help Thanks

Any other Ideas will also be appreciated.
Or if you can sell me a cable that will be smashing.


Thanks Steve

__________________
Page 1 of 1  sorted by
 
Quick Reply

Please log in to post quick replies.



Create your own FREE Forum
Report Abuse
Powered by ActiveBoard