rgunther13 wrote:With the 02 sensor disconnected from the harness, in Rhino View, the voltage of the 02 shows 1.2 V (Bank 1) I tried to adjust the ignition point, but the minimum value that appears in the Rhinoview is 13 degrees, not lower than this value ECU ID: 1901
-- Edited by rgunther13 on Tuesday 16th of March 2021 01:04:43 PM
The ECU has no way of knowing if you have adjusted the position of the sensor, it assumes that it is set correctly.
__________________
1984 Suzuki SJ413K pick up, 1.6 16V Baleno engine 2000 Suzuki Vitara 1.6 8V, many mods 2004 Suzuki Ignis 1.5VVT 4Grip 2006 Suzuki Jimny 1.3VVT JLX+ and many more.
With the 02 sensor disconnected from the harness, in Rhino View, the voltage of the 02 shows 1.2 V (Bank 1) I tried to adjust the ignition point, but the minimum value that appears in the Rhinoview is 13 degrees, not lower than this value ECU ID: 1901
-- Edited by rgunther13 on Tuesday 16th of March 2021 01:04:43 PM
Hello everybody. When I diagnose my car with the RhinoView software, the oxygen sensor voltage reading is always in red, almost always marking 3v. my car is a suzuki grand vitara 1999 v6 h25a 2.5l. Would it be a problem with the two oxygen sensors or some software incompatibility? I found on YouTube a video of a person who has the same problem. can you help me?
the video link is below. https://youtu.be/RPO5izxnaYk
