RhinoPower Ltd

TechSupport · Guru

RE: 33920-58B30 ecm stock ignition / fuel table dump? 1992-1993 sidekick 1.6 16v?

Blazeking · Newbie

Also i just saw that microsquirt accepts maf based fuel and spark tables. Are these tables available? I havent been able to find them.

Blazeking · Newbie

Also is there a pinout for this connection available i cant seem to find one unless its in the manual you linked me that i havent got to read yet

Blazeking · Newbie

TechSupport wrote:
Aftermarket ECUs tend to use MAP/VE based tables, the 16V is MAF based so the tables are incompatible. Sensor values are given in the FSM which can be downloaded here:
http://www.rhinoman.org/manuals/vitara/99500_60A10.pdf - main manual
http://www.rhinoman.org/manuals/vitara/99501_61A10.pdf - supplement for Mitsu 16V EFI

-- Edited by TechSupport on Monday 23rd of March 2020 07:57:00 AM

Is there a way to program the factory ecm then or an aftermarket ecm/ setup you would recommend for this application? Thanks agian for the info already it helps alot!

TechSupport · Guru

Aftermarket ECUs tend to use MAP/VE based tables, the 16V is MAF based so the tables are incompatible. Sensor values are given in the FSM which can be downloaded here:

http://www.rhinoman.org/manuals/vitara/99500_60A10.pdf - main manual

http://www.rhinoman.org/manuals/vitara/99501_61A10.pdf - supplement for Mitsu 16V EFI

-- Edited by TechSupport on Monday 23rd of March 2020 07:57:00 AM

Blazeking · Newbie

Hello i am looking for the ecm tables for the attached ecm. I believe it is out of a 1992-1993 suzuki sidekick manual trans but i am not sure as the engine was swapped into my samurai before i purchased it. I am also looking for what the calibration settings are for the sensors on this engine to go aftermarket ecu. This seems like the place with the most info for this engine so i thought I would try here. Thank you!