RhinoPower Ltd

Members Login
    Remember Me  
Post Info TOPIC: Can RV read this G13BB ECM / PCM


Status: Offline
Posts: 1354
Can RV read this G13BB ECM / PCM

That ECU uses KWP2000, RhinoView does not support that protocol, you would need the Suzuki Tech2 or SDT tool.


1984 Suzuki SJ413K pick up, 1.6 16V Baleno engine
2000 Suzuki Vitara 1.6 8V, many mods
2004 Suzuki Ignis 1.5VVT 4Grip
2006 Suzuki Jimny 1.3VVT JLX+
and many more.


Status: Offline
Posts: 1

Hi All..!

I have a G13BB Engine mounted and running on a fabricated chassis which was taken out of a Maruti-Suzuki Esteem VXi from year 2007. The ECM / PCM details are as follows:

ECM / PCM: 33920-66ES 0

Euro - 3

Make: Denso (India)

This engine is being used to check the efficiency and meaningfulness of a high energy ignition system designed by me over last few years. Presently the engine is in stock condition and running as it should. There is no load connected to it but later on an alternator (82.5 KVA) would be coupled to the engine via a 2:1 reduction gearbox. The engine is planned to be run at 3000 RPM in order to run the alternator at 1500 RPM. I need to record all data pertaining to the engine before and after modifications for sake of comparison and fine tuning of the fuel delivery system.

The engine has a 16 pin OBD2 type connector with pin numbers 4, 5, 7 and 16 connected. Pin 4 is Ground (Body), pin 5 is Ground (ECM / PCM), pin 7 is Serial Data Line (K Line of ISO 9141) and pin 16 is +12V.

From my readings what I understand that this is so called OBD1 / EOBD / Pre-OBD2 ECM / PCM using a SUZUKI Proprietary bi-directional communication line at pin 7. Also, this would communicate using an ALDL cable connected to COM port of a PC. Getting or fabricating an ALDL cable to connect the port to PC is not an issue with me. I need to know whether RhinoView can communicate and capture all the data from this ECM / PCM? And, if not, then what can I do to get log the data? I'd be thankful to anyone who can help me with this.


Samarth Kumar Nawni Technical Head (R&D)-Mechatronics NexGEN Consultancy Pvt. Ltd.
Page 1 of 1  sorted by
Quick Reply

Please log in to post quick replies.

Create your own FREE Forum
Report Abuse
Powered by ActiveBoard