RhinoPower Ltd

Members Login
Username 
 
Password 
    Remember Me  
Post Info TOPIC: Suzuki swift GTI I2 tuning question


Member

Status: Offline
Posts: 20
Date:
RE: Suzuki swift GTI I2 tuning question
Permalink  
 


Hey, hope this post is helpful--I'm more active on TeamSwift, though I should pay attention here too:

 

http://www.teamswift.net/viewtopic.php?f=14&t=54431&start=100#p429711

 

The rpm values are approximate--I think some of them need to be tweaked a little, but it's a good ballpark to start with.  That's from just trying to watch the tach and the laptop while pulling through 2nd gear.

 

 



__________________


Member

Status: Offline
Posts: 6
Date:
Permalink  
 

Hello there,

 

Just a hint about how to tune it?



__________________


Guru

Status: Offline
Posts: 1357
Date:
Permalink  
 

I don't have any exact values, they are usually tuned using an emulator, my preference is the Ostrich 2. The TunerPro definition is used to see where on the map the ECU is currently operating and then the values are increased and decreased. I did start doing some more work on this ECU a couple of weeks ago but the RPM values that I was getting didn't tally with what I thought I was applying, I need someone to check those. I am also working on a board that will allow me to log the RAM data in the micro which will help to confirm some other parameters.

__________________

1984 Suzuki SJ413K pick up, 1.6 16V Baleno engine
2000 Suzuki Vitara 1.6 8V, many mods
2004 Suzuki Ignis 1.5VVT 4Grip
2006 Suzuki Jimny 1.3VVT JLX+
and many more.



Member

Status: Offline
Posts: 6
Date:
Permalink  
 

Hello guys,

 

Do you have any idea about how to tune this ecu. How much ignition and fuel needs (how much must i increase/decrease)?

Can you help me a bit more with the numbers please?

 

Any help would be great

 

Thank you



__________________
Page 1 of 1  sorted by
 
Quick Reply

Please log in to post quick replies.



Create your own FREE Forum
Report Abuse
Powered by ActiveBoard