RhinoPower Ltd

Members Login
Username 
 
Password 
    Remember Me  
Post Info TOPIC: Suzuki Jimny 2005 M13A engine


Guru

Status: Offline
Posts: 1351
Date:
Suzuki Jimny 2005 M13A engine
Permalink  
 


fedor42 wrote:

Tech 2, Tech 1.5, etc, in Costa Rica may be $700 (US$), second hand... (used).


Thats cheap for a Tech 2. I have been trying to source one but most of them are clones with US only software. I have a couple of Tech 1 tools but I only have cartridges for 1991-95 years. I also have an SDT but but that only covers later N. America models and diesel models.

 



__________________

1984 Suzuki SJ413K pick up, 1.6 16V Baleno engine
2000 Suzuki Vitara 1.6 8V, many mods
2004 Suzuki Ignis 1.5VVT 4Grip
2006 Suzuki Jimny 1.3VVT JLX+
and many more.



Guru

Status: Offline
Posts: 1351
Date:
Permalink  
 

My software won't work with this ECU, it only works if you have diagnostics on pin 9.



__________________

1984 Suzuki SJ413K pick up, 1.6 16V Baleno engine
2000 Suzuki Vitara 1.6 8V, many mods
2004 Suzuki Ignis 1.5VVT 4Grip
2006 Suzuki Jimny 1.3VVT JLX+
and many more.



Member

Status: Offline
Posts: 5
Date:
Permalink  
 

Oh No! I´m back to the ideas world again....

Tech 2, Tech 1.5, etc, in Costa Rica may be $700 (US$), second hand... (used).

Is more expensive that I think to buy, I´ll search if any mechanic in Costa Rica, may be read codes from my Jimny... (I don´t want buy another OBD2 car... ja ja ja).

Thanks for all, Pura Vida!



-- Edited by fedor42 on Monday 9th of April 2012 12:47:40 AM

__________________


Member

Status: Offline
Posts: 5
Date:
note and question...
Permalink  
 


Dear friend, your connector can do a link with my ECU?? with your software too???

I want to buy your hardware, I´m looking for an importer, that can make the pay for you...

Thanks a lot, Pura vida!



__________________


Guru

Status: Offline
Posts: 1351
Date:
RE: Suzuki Jimny 2005 M13A engine
Permalink  
 


I think that it is most likely to be SDL/KWP which is a Suzuki protocol and not OBD2 - it uses the same pins as ISO9141-2. This protocol was used in many countries where OBD2 was not required by law.



__________________

1984 Suzuki SJ413K pick up, 1.6 16V Baleno engine
2000 Suzuki Vitara 1.6 8V, many mods
2004 Suzuki Ignis 1.5VVT 4Grip
2006 Suzuki Jimny 1.3VVT JLX+
and many more.



Member

Status: Offline
Posts: 5
Date:
OBD 2 pins Jimny 2005 gasoline M13A engine
Permalink  
 


Pins used are: # 4, 5, 7 and 16, maybe iso 9142... all scanners used are made with this protocol... I don´t understand why didn´t read codes...

 

Thanks a lot, and sorry I don´t speak english very well...

_DSC9543 (1)_2755x1834.jpg

_DSC9548 (1)_2755x1834.jpg_DSC9555 (1)_2755x1834.jpg



__________________


Guru

Status: Offline
Posts: 1351
Date:
RE: Suzuki Jimny 2005 M13A engine
Permalink  
 


It could be a protocol called SDL/KWP, you can test for it using an ELM tool and a terminal emulator as described here:

http://rhinopower.activeboard.com/t37527320/33920-79fs-ecu-maruti-suzuki-wagon-r-euro-3-ecu/



__________________

1984 Suzuki SJ413K pick up, 1.6 16V Baleno engine
2000 Suzuki Vitara 1.6 8V, many mods
2004 Suzuki Ignis 1.5VVT 4Grip
2006 Suzuki Jimny 1.3VVT JLX+
and many more.



Senior Member

Status: Offline
Posts: 196
Date:
Permalink  
 

A good place to start is to look at the diagnostic port and list which of the pins are populated.

From that we can get an idea as to which protocols may be considered.



__________________


Member

Status: Offline
Posts: 5
Date:
Permalink  
 

We used 4 or more different scan tools, no way to read any data, can Rhino hardware read codes from Jimny???

 

Thanks from Costa Rica, I need some help please.



__________________
Page 1 of 1  sorted by
 
Quick Reply

Please log in to post quick replies.



Create your own FREE Forum
Report Abuse
Powered by ActiveBoard