RhinoPower Ltd

Members Login
Username 
 
Password 
    Remember Me  
Post Info TOPIC: Hello from Halifax, Nova Scotia, Canada


Newbie

Status: Offline
Posts: 3
Date:
RE: Hello from Halifax, Nova Scotia, Canada
Permalink  
 


Thank you very much for the quick reply.

 

The data you povided is much appreciated.

Cheers,

The Prof!



__________________
The Prof! 91 Sidekick JX, 8V, S. Carolina Car, 2 dr, 3 speed Auto Trani, Halifax, NS, Canada


Guru

Status: Offline
Posts: 1354
Date:
Permalink  
 

The parameter vaules varies from vehicle to vehicle and should be shown in the FSM but this is not always the case. key on baro and MAP readings can be checked with a local weather station, TPS Angle should be between 0 and 100% although in mnay cases it doesn't read more than 95%. Fuel trims should be around 128 or 0 depending on model. IAT, CTS and EGR temperatures can be checked against ambient when the vehicle is cold, CTS should max at around 80C with a standard thermostat. Injector PW with the engine warm is (I think - I was scanning mine last night) around 1.3ms. IAC duty cycle should be around 50% at idle engine warm and O2 should switch between 0 and 1V.



__________________

1984 Suzuki SJ413K pick up, 1.6 16V Baleno engine
2000 Suzuki Vitara 1.6 8V, many mods
2004 Suzuki Ignis 1.5VVT 4Grip
2006 Suzuki Jimny 1.3VVT JLX+
and many more.



Newbie

Status: Offline
Posts: 3
Date:
Permalink  
 

Got the RV working - thanks.

Is there any document that explains what the range of the parameters shown on the RV should be?  I have read the entire help document.  There is some spars info in there, but not for all the parameters.

 

Your guidance would be fully appreciated.

Cheers,

The Prof!



__________________
The Prof! 91 Sidekick JX, 8V, S. Carolina Car, 2 dr, 3 speed Auto Trani, Halifax, NS, Canada


Guru

Status: Offline
Posts: 1354
Date:
Permalink  
 

For the 8V Sidekick you can also run TunerPro RT v5, with the 1112.adx file which should be around here somewhere.



__________________

1984 Suzuki SJ413K pick up, 1.6 16V Baleno engine
2000 Suzuki Vitara 1.6 8V, many mods
2004 Suzuki Ignis 1.5VVT 4Grip
2006 Suzuki Jimny 1.3VVT JLX+
and many more.



Guru

Status: Offline
Posts: 1354
Date:
Permalink  
 

Hi, welcome to the forum. The driver that you need is the VCP driver available here:

http://www.ftdichip.com/Drivers/VCP.htm

Once you have unzipped the Rhinoview download you will find the help files are in the Help folder.

__________________

1984 Suzuki SJ413K pick up, 1.6 16V Baleno engine
2000 Suzuki Vitara 1.6 8V, many mods
2004 Suzuki Ignis 1.5VVT 4Grip
2006 Suzuki Jimny 1.3VVT JLX+
and many more.



Newbie

Status: Offline
Posts: 3
Date:
Permalink  
 

Hello folks:

I just got the SDL interface and am veruy excited to use it.

Here are a couple of simple questions:

1. Which driver should I download and install from the list of drivers in www. Ftdchip.com (I am running Windows 7 OS).

2.  There has to be a manual for the use of the software/hardware – where would that be?

Cheers!

 



__________________
The Prof! 91 Sidekick JX, 8V, S. Carolina Car, 2 dr, 3 speed Auto Trani, Halifax, NS, Canada
Page 1 of 1  sorted by
 
Quick Reply

Please log in to post quick replies.



Create your own FREE Forum
Report Abuse
Powered by ActiveBoard