RhinoPower Ltd

madmaxarjun · madmaxarjun

Hi all, I have been trying to sort out a flat spot issue I have had for quite some time. We went through all the sensors and everthing seems to be in spec. While troubleshooting the issue, the TPS grabbed my attention, though the voltage seem to in the defined limits, I was not able to read over 3.6 volts at ...

IndrojitSircar · IndrojitSircar

Hi guys, i picked up a 1.6 Euro III baleno engine from a scrapper a couple of days back with the ECU and Wiring from the ECU to the Engine. Now on the ECU end of the wiring i find there are 3 couplers. Out of which only two which are white in colour fit the ECU and i am left with one more coupler that is much bigger a...

chandra · chandra

Hi, My 2007 alto has the OBD II connector port. I can initiate a connection using the ISO 14320-4 KWP protocol using the ELM based scanner. I also increased the ELM timeout to almost 1 second. However, the only response I get for any command is 7F xx xx. Is there a possibility that the interface uses the s...

TechSupport · TechSupport

If anyone has a source for Indian market ECUs for a reasonable cost please PM me with details. It will help with discovering what protocols are in use. Thanks James

Subhash · Subhash

HI, Like old model wagon R,the monitor terminal (Socket) inside fuse/relay box in engine room is not used in Euro3 model. Also On board dignostic is SDT and not OBD1orOBD2.Is there any way to find error code in new model(Euro 3) by connecting a jumper between two terminals? Maruti service centre peo...

Subhash · Subhash

In the speedometer eprom bin file.where does the odometer data saved? is it possible to edit that data with eprom programmer like Elnec programmer? Thanks and regards

Topic		Started By	Replies	Views	Last Post
	TPS info for baleno G16b Euro II (Preview) Hi all, I have been trying to sort out a flat spot issue I have had for quite some time. We went through all the sensors and everthing seems to be in spec. While troubleshooting the issue, the TPS grabbed my attention, though the voltage seem to in the defined limits, I was not able to read over 3.6 volts at ...	madmaxarjun	11	6469	Jul 21, 2012 by kostuch
	Baleno Euro III wiring query (Preview) Hi guys, i picked up a 1.6 Euro III baleno engine from a scrapper a couple of days back with the ECU and Wiring from the ECU to the Engine. Now on the ECU end of the wiring i find there are 3 couplers. Out of which only two which are white in colour fit the ECU and i am left with one more coupler that is much bigger a...	IndrojitSircar	5	4549	Aug 4, 2011 by mclaren1885
	OBD in 2007 alto (Preview) Hi, My 2007 alto has the OBD II connector port. I can initiate a connection using the ISO 14320-4 KWP protocol using the ELM based scanner. I also increased the ELM timeout to almost 1 second. However, the only response I get for any command is 7F xx xx. Is there a possibility that the interface uses the s...	chandra	7	9967	Apr 9, 2011 by TechSupport
	Indian ECUs (closed) (Preview) If anyone has a source for Indian market ECUs for a reasonable cost please PM me with details. It will help with discovering what protocols are in use. Thanks James	TechSupport	0	4371	Nov 12, 2010 by TechSupport
	MARUTI-SUZUKI wagon R EURO3 (Preview) HI, Like old model wagon R,the monitor terminal (Socket) inside fuse/relay box in engine room is not used in Euro3 model. Also On board dignostic is SDT and not OBD1orOBD2.Is there any way to find error code in new model(Euro 3) by connecting a jumper between two terminals? Maruti service centre peo...	Subhash	1	4348	Sep 23, 2010 by TechSupport
	Alto(Maruti Suzuki) (Preview) In the speedometer eprom bin file.where does the odometer data saved? is it possible to edit that data with eprom programmer like Elnec programmer? Thanks and regards	Subhash	2	4315	Aug 13, 2010 by Subhash
«First < 1 2 \| Page of 2 sorted by