RhinoPower Ltd

Members Login
Username 
 
Password 
    Remember Me  
Post Info TOPIC: 1.6 Swap Injecton problem


Newbie

Status: Offline
Posts: 3
Date:
RE: 1.6 Swap Injecton problem
Permalink  
 


TechSupport wrote:

When you fitted the 1.6 computer did you modify the wiring?


 

I took the signal from the noise suppressor filter and bring it to the A1 Terminal on the ECU; The original 1.3 o2 sensor has four wires and i have connected the 1.6 one with faston using only 3 wires from the original connector, (1 for the signal and two for the heater, i left the fourth position from the car wiring disconnected). I also left disconnected a second o2 sensor that was mounted on the catalyitic converter that i removed mounting a new hand made exhaust.

For what i remember these are all the modification that i did on the electrical wireness.

I don't know what i can tryng to do on this car, i tried to test all the components, i didn't find anithig.



__________________


Guru

Status: Offline
Posts: 1173
Date:
Permalink  
 

When you fitted the 1.6 computer did you modify the wiring?

__________________

1984 Suzuki SJ413K pick up, 1.6 16V Baleno engine
2000 Suzuki Vitara 1.6 8V, many mods
2004 Suzuki Ignis 1.5VVT 4Grip
2006 Suzuki Jimny 1.3VVT JLX+
and many more.



Newbie

Status: Offline
Posts: 3
Date:
Permalink  
 

Hi at all,

I'm new here, i'm from italy, first of all i have to apologize for my english.

I have a 1994 suzuki samurai, i recently put into it a 1.6 G16A with its intake manifold and tbi, i'm using the original 1.3 distributor and ignition coil.

The car won't run properly, when is hot particullary, when i rev the engine it hesitate badly and is ovviusly undrivable.

I tried to use the original 1.3  ecu, map sensor, and lambda sensor, then i tried to put the 1.6 components and i tried to use another fuel injector too, but nothing is changed.

I don't have ECU Errors.

A strange thing that i have noticed is when i disconnect the Coolant Temperature Sensor The engine seems to run almost perfect, if i plug it, i always have the same problem.

With the orginal 1.3 engine fuel injected i never had no fuel problem at all ( i put the 1.6 because the 1.3 engine was cracked somewhere and it had an  water burn problem).

I don't know what can i try to test so if you can give me some advices i would be grateful.

Thank you

Hello At all!!!!!!!



__________________
Page 1 of 1  sorted by
 
Quick Reply

Please log in to post quick replies.



Create your own FREE Forum
Report Abuse
Powered by ActiveBoard