RhinoPower Ltd

Members Login
Username 
 
Password 
    Remember Me  
Post Info TOPIC: ecu 33920-75H ( engine suzuki K12A EU NA 4AT 2H)


Member

Status: Offline
Posts: 14
Date:
RE: ecu 33920-75H ( engine suzuki K12A EU NA 4AT 2H)
Permalink  
 


 

thanks,

Please tell me the steps how to reach the result?? And wich  kind of tools I need???   



__________________


Guru

Status: Offline
Posts: 1186
Date:
Permalink  
 

You need to pull the fault codes from the immobiliser, code 23 is usually a memory failure in the immobiliser. You should also check that the back up supply to the ECU is present, if it is not then the message from the immobiliser will reach the ECU before it is fully initialised and it will not be registered.

__________________

1984 Suzuki SJ413K pick up, 1.6 16V Baleno engine
2000 Suzuki Vitara 1.6 8V, many mods
2004 Suzuki Ignis 1.5VVT 4Grip
2006 Suzuki Jimny 1.3VVT JLX+
and many more.



Member

Status: Offline
Posts: 14
Date:
Permalink  
 

 

hellou!!

 

When tested by ICM , I found out the trouble code - DTC23 (serial data link wire). What to do next...??

Thanks!!



__________________


Member

Status: Offline
Posts: 14
Date:
Permalink  
 

 

 

Thanks PANCHO for magnet link.........!! It seems that there are problems with immobilizer.



__________________


Guru

Status: Offline
Posts: 1186
Date:
Permalink  
 

You'll need to unpack the file into a folder, RV needs to be able to read and write to the initialisation files where the user settings are stored.



__________________

1984 Suzuki SJ413K pick up, 1.6 16V Baleno engine
2000 Suzuki Vitara 1.6 8V, many mods
2004 Suzuki Ignis 1.5VVT 4Grip
2006 Suzuki Jimny 1.3VVT JLX+
and many more.



Member

Status: Offline
Posts: 14
Date:
Permalink  
 

Okey!

 

I'll try again. I will use Win7 and  accurately, respectively, also D2xx drivers. On Saturday.....:). How is it better? RV starting from the WinRAR or unpack the file in a folder?

 

 

 

 
 
 
 
 
 

 

 



-- Edited by aivars on Tuesday 26th of July 2016 01:07:17 PM

__________________


Guru

Status: Offline
Posts: 1186
Date:
Permalink  
 

Which version of the drivers are you using? I think the programming in the interface has been corrupted, this happened to another one recently although I have shipped hundreds without a problem. You may need to return the interface.

__________________

1984 Suzuki SJ413K pick up, 1.6 16V Baleno engine
2000 Suzuki Vitara 1.6 8V, many mods
2004 Suzuki Ignis 1.5VVT 4Grip
2006 Suzuki Jimny 1.3VVT JLX+
and many more.



Member

Status: Offline
Posts: 14
Date:
Permalink  
 


Yes, I installed the D2XX drivers.... Its OK, no errors...

__________________


Guru

Status: Offline
Posts: 1186
Date:
Permalink  
 

Have you installed the D2XX drivers?

__________________

1984 Suzuki SJ413K pick up, 1.6 16V Baleno engine
2000 Suzuki Vitara 1.6 8V, many mods
2004 Suzuki Ignis 1.5VVT 4Grip
2006 Suzuki Jimny 1.3VVT JLX+
and many more.



Member

Status: Offline
Posts: 14
Date:
Permalink  
 

THANKS!

 

Manual does not specify the ECU inputs and outputs. Since the engine is not a spark, then I try scanning engine devices... Yet the engine ECU to scan and find the errors I have not succeeded.



__________________


Member

Status: Offline
Posts: 15
Date:
Permalink  
 

aivars

In the first image of your computer, the photo is very far, but at bottom, left, of RV it shows your interface is no detected, check with XP or win7..

The manuals for  Wagon 1998 are available: 99500-75F01-01E, 99501-75F00-01E, 99512-75F00-015, 99512-75F10-015 you can download with torrent.   (also for Baleno, GV, Ignis, Jimny, Liana, Samurai, Swift in the same torrent) 


select the manual you need of all them, to not download all..
here is the magnet link to dowload=
magnet:?xt=urn:btih:F826653378C96D389E368426F16A1D56DC5B1135



-- Edited by pancho on Sunday 24th of July 2016 03:35:50 PM

__________________


Member

Status: Offline
Posts: 14
Date:
Permalink  
 

 

Hellou!

 Much needed ECU 33920 -75H pinout shematic list.. help!!!



__________________


Member

Status: Offline
Posts: 14
Date:
Permalink  
 

hei!

- win 8

- Baud rate 7812

- cable plug...... statuss ok!

  I try software RhinoPower....., bat status - not connected

nonono



Attachments
__________________


Member

Status: Offline
Posts: 14
Date:
Permalink  
 

OK! I will tray..... I will use win 7...



__________________


Guru

Status: Offline
Posts: 1186
Date:
Permalink  
 

aivars wrote:  
  •  I try software RhinoPower....., bat status - not connected!!!  I do not understand why .

 


 

Does RhinoView show 'SDL Interface' in the bottom left of the status bar? if so have you set the baud rate to 7812 before attempting to connect?



__________________

1984 Suzuki SJ413K pick up, 1.6 16V Baleno engine
2000 Suzuki Vitara 1.6 8V, many mods
2004 Suzuki Ignis 1.5VVT 4Grip
2006 Suzuki Jimny 1.3VVT JLX+
and many more.



Guru

Status: Offline
Posts: 1186
Date:
Permalink  
 

There are problems with Windows 10, I haven't investigated these yet but its not usable.

__________________

1984 Suzuki SJ413K pick up, 1.6 16V Baleno engine
2000 Suzuki Vitara 1.6 8V, many mods
2004 Suzuki Ignis 1.5VVT 4Grip
2006 Suzuki Jimny 1.3VVT JLX+
and many more.



Member

Status: Offline
Posts: 14
Date:
Permalink  
 

 

 

PC software for the RhinoPower SDL is compotible with windows 10??



__________________


Member

Status: Offline
Posts: 14
Date:
Permalink  
 

I do not understand what to do ......!!!! I still can not read errors

 

  • The fault  from the ECU using the Check Engine Light -  Result through yet unclear  (see attach, I have a 30-second video, but I can not add)

 

  •  I try software RhinoPower....., bat status - not connected!!!  I do not understand why .


-- Edited by aivars on Saturday 16th of July 2016 06:31:13 PM

Attachments
__________________


Guru

Status: Offline
Posts: 1186
Date:
Permalink  
 

Yes, that's the correct connector.



__________________

1984 Suzuki SJ413K pick up, 1.6 16V Baleno engine
2000 Suzuki Vitara 1.6 8V, many mods
2004 Suzuki Ignis 1.5VVT 4Grip
2006 Suzuki Jimny 1.3VVT JLX+
and many more.



Member

Status: Offline
Posts: 14
Date:
Permalink  
 

Suzuki Wagon interior is under conector. It could be to the ecu reader?



Attachments
__________________


Member

Status: Offline
Posts: 14
Date:
Permalink  
 

 

Thanks!! I will try....



__________________


Guru

Status: Offline
Posts: 1186
Date:
Permalink  
 

You can pull current fault codes using the monitor coupler (diagnostic socket) as described here:

www.rhinopower.org/diag/cel.html

The SDL interface will allow you to access live data and stored codes.

__________________

1984 Suzuki SJ413K pick up, 1.6 16V Baleno engine
2000 Suzuki Vitara 1.6 8V, many mods
2004 Suzuki Ignis 1.5VVT 4Grip
2006 Suzuki Jimny 1.3VVT JLX+
and many more.



Member

Status: Offline
Posts: 14
Date:
Permalink  
 

Please Help? I need read  fault ecu suzuki wagon r+ (1999 year) 



Attachments
__________________
Page 1 of 1  sorted by
 
Quick Reply

Please log in to post quick replies.



Create your own FREE Forum
Report Abuse
Powered by ActiveBoard